Question 1

What is pipe relining?

Accepted Answer

Pipe relining is a modern rehabilitation technique that repairs a damaged pipe from the inside, without excavation. The process involves inserting a flexible liner impregnated with epoxy resin into the existing pipe through an access point. The liner is then inflated against the pipe walls using air or water pressure, and the resin is left to cure — typically for 2 to 4 hours depending on the product and temperature. Once hardened, the liner forms a new, smooth, watertight pipe inside the old one. This inner pipe is seamless, eliminating joint weaknesses where roots and water previously infiltrated. The technique is suitable for pipes suffering from cracks, joint offsets, root penetration and general ageing. It works on stoneware, cast iron, PVC and concrete, and treats diameters from 50 to 300 mm. The result is a fully functional pipe with a lifespan of 30 to 50 years.

Question 2

Does pipe relining avoid excavation work?

Accepted Answer

Yes, avoiding excavation is the primary advantage of pipe relining. Traditional pipe replacement requires digging up gardens, driveways, floors or even roads to access the damaged section — a process that is disruptive, time-consuming and expensive. With no-dig rehabilitation, the repair is carried out entirely from existing access points such as inspection chambers, manholes or drain openings. There is no need to break up floor tiles, tear up the garden or excavate beneath the foundation. This means no restoration costs for landscaping, paving, flooring or masonry. The intervention is also significantly quieter and faster than traditional excavation. For urban properties with limited access or properties with finished interiors — such as tiled basements or landscaped gardens — lining is often the only practical solution. It delivers the same structural result as pipe replacement but at a fraction of the cost and disruption.

Question 3

How long does pipe relining last?

Accepted Answer

A properly executed pipe relining delivers a lifespan of 30 to 50 years, making it a durable, long-term solution. The epoxy resin used in the liner is engineered to withstand the harsh conditions inside drainage pipes: chemical attack from household cleaning products and wastewater, root pressure from nearby trees and vegetation, temperature variations from hot water discharge, and ground movement. The cured liner is seamless, which eliminates the joint weaknesses that are the primary entry point for roots and infiltration water in traditional pipes. The interior surface is smoother than the original pipe, which actually improves flow capacity and reduces the likelihood of future blockages. Independent testing by European standards bodies confirms the long-term durability of modern resin systems. After no-dig rehabilitation, the pipe requires no special maintenance beyond normal use.

Question 4

How do I know if my pipes need relining?

Accepted Answer

Several warning signs suggest that your pipes may need attention: recurring blockages despite professional clearing, bad odours that persist after cleaning, damp patches on walls or floors near drainage routes, subsidence or sinkholes in the garden above buried pipes, and root infiltration visible during camera inspections. The definitive way to assess pipe condition is a preliminary camera inspection. A high-definition endoscopic camera is inserted into the pipe to visualise its interior condition in real time. The specialist can identify cracks, fractures, joint offsets, root penetration, corrosion and structural collapse. A detailed report with images is provided, along with a clear recommendation on whether relining is the most suitable solution, or whether spot repair or full replacement would be more appropriate. This inspection is the essential first step before any decision.

Question 5

How much does pipe relining cost in Luxembourg?

Accepted Answer

The cost of pipe relining in Luxembourg depends on several factors: the length and diameter of the pipe to be treated, the number and severity of defects, accessibility of the pipe, and the type of no-dig rehabilitation required. Spot lining — which treats a single isolated defect such as a crack or offset joint — is the most affordable option and is completed in a single day. Full-length trenchless lining, which treats the entire pipe run, costs more but provides comprehensive protection against future problems. In all cases, no-dig rehabilitation is significantly cheaper than traditional pipe replacement with excavation, because there are no costs for earthworks, floor or garden restoration, or masonry. A detailed quote is provided after the camera inspection, with a clear comparison between pipe restoration and replacement options. This allows an informed decision based on accurate information.

Question 6

Does pipe relining work on all types of pipes?

Accepted Answer

Yes, pipe relining is compatible with all common pipe materials found in Luxembourg properties: PVC, cast iron, stoneware (ceramic) and concrete. It treats pipes with diameters ranging from 50 to 300 mm, which covers the vast majority of residential and commercial drainage installations — from kitchen and bathroom waste pipes to external sewer connections. The flexibility of the resin liner allows it to navigate bends and junctions within certain limits, and the curing process ensures a tight bond with the existing pipe wall regardless of the material. Before any no-dig rehabilitation work, a camera inspection is carried out to confirm that the pipe is structurally sound enough to receive the liner. In cases of severe collapse or deformation, the specialist will advise on alternative solutions. The inspection report provides full transparency on what is feasible and recommended.

Question 7

How long does a relining project take?

Accepted Answer

The duration of a relining project depends on the scope of work. A spot no-dig rehabilitation — treating a single defect such as a crack, offset joint or root perforation — is typically completed within a single day, including preparation, installation and curing. Full-length lining of an entire pipe run takes 1 to 2 days, depending on the length and diameter of the pipe and access conditions. The resin liner requires 2 to 4 hours to cure before the pipe can be returned to service. During this curing period, alternative drainage arrangements are made if necessary. Compared to traditional pipe replacement — which can take a week or more when factoring in excavation, pipe laying, backfilling and surface restoration — trenchless lining delivers a dramatic reduction in project duration. This minimises disruption to daily life, particularly important in occupied residential properties and commercial premises.

Question 8

Is pipe relining suitable for condominiums?

Accepted Answer

Yes, pipe relining is the ideal solution for condominiums and multi-unit buildings, where traditional pipe replacement would cause unacceptable disruption. In a condominium, drainage pipes often run through shared walls, floors and risers, making excavation extremely invasive — and requiring consent from multiple owners. No-dig rehabilitation eliminates these problems entirely: there is no excessive noise, no dust-generating demolition, no trenches in corridors or common areas, and no prolonged interruption to residents' water or drainage. The work is carried out from existing access points, typically in the basement or through inspection chambers. Coordination with the property manager (syndic) is handled by the specialist to plan the intervention at the most convenient time and communicate clearly with all affected parties. Water shutoffs are minimised and residents can typically remain in their apartments throughout the process. A camera inspection report is shared with the syndic for the building's records.

Pipe Lining Services Luxembourg ★ 4.6/5

Service areas

Customer reviews

Our pipe relining services

Our detailed pipe relining services